The function of multi compartment separation design for oil tanker trucks and synchronous transportation scheme for diesel and fuel

Jul 07, 2026

Leave a message

1, The four practical functions of multi warehouse separation core
(1)Completely isolate oil products and prevent cross contamination
The interior of the tank is divided into 2-5 independent compartments using thickened sealed partitions. Each compartment is equipped with a dedicated feed inlet, discharge valve, and conveying pipeline, which are physically completely separated. Diesel, different grades of gasoline, and kerosene will not mix with each other, ensuring the purity of the oil and avoiding customer losses and safety hazards caused by mixing. It meets the requirements of hazardous chemical transportation regulations in various countries.
(2)Suppress liquid surges and enhance driving safety
When the vehicle is on bumpy roads or making sudden braking turns, the large shaking of a single tank of fuel can easily generate impact force, causing the risk of the vehicle body overturning. The separation compartment splits the liquid space, significantly reducing the amplitude of fuel surge and minimizing the impact on the frame and axle, making it suitable for long-distance high-speed driving scenarios on rocky mountain roads in Africa and deserts in the Middle East.
(3)One vehicle for multiple purposes, reducing transportation and operating costs
Traditional single tank trucks transporting diesel and gasoline require two trips, while multi tank models can simultaneously deliver multiple fuels on a single trip, reducing the frequency of trips, fuel consumption, and driver labor costs. They are particularly suitable for gas stations in scattered towns and remote mining areas to supply fuel.
(4)Flexible allocation of capacity, adapted to diversified orders
The cabin capacity can be customized and divided according to needs, such as one large and one small warehouse, or three equally divided warehouses. The loading capacity can be flexibly matched according to customer orders, avoiding the problem of insufficient single oil filling and waste of tank space. Loading scheduling is more flexible.
2, Complete implementation plan for synchronous transportation of diesel and multiple fuels
(1)Warehouse allocation standard matching
Conventional recommendation for 3/4 warehouse layout: Large capacity compartments are used to load diesel (which is consumed in mines and construction sites), while the remaining small compartments are used to pack different grades of gasoline and kerosene. Each warehouse is independently labeled to clearly distinguish the oil products, making it difficult to confuse loading and unloading.
(2)Independent pipeline unloading system
Each warehouse is equipped with an independent oil pump and unloading pipeline, which can be loaded and unloaded separately. During the delivery process, it will be transported to the diesel demand construction site and the gasoline filling station in sequence. There is no need to empty the tank halfway, and the unloading can be done directly at different points, completing multi customer delivery in one stop.
(3)Overseas working condition adaptation upgrade configuration
For high-temperature and dusty overseas markets, thick anti-corrosion coatings are applied to the partition welds, and high-temperature resistant seals are selected for valves; Install separate compartment independent filters to prevent dust from blocking pipelines; The chassis comes standard with multiple brake cooling structures, ensuring stable and reliable long-distance full load and multi fuel driving.
(4)Key points for compliant transportation
Gasoline and diesel have different flash point properties, and rely on sealed partitions for physical isolation and safe transportation in separate warehouses; Before each change of transportation category, empty the corresponding compartment of residual oil and clean the pipelines separately to completely eliminate the problem of oil residue mixing.

Send Inquiry