Many breakdowns on long-distance freight routes do not occur suddenly. The dashboard of the vehicle has long given a warning, but many drivers feel that the lights disappear with just one flash, which does not affect their ability to continue running, so they do not take it seriously. In the end, minor faults continue to worsen, not only delaying delivery time, but also incurring high maintenance costs. Understanding various warning signals on the dashboard is a basic skill that every long-distance driver must master, which can help everyone avoid sudden faults on the road in advance and reduce the operational losses of the fleet. The dashboard warning lights can be distinguished by color to indicate the level of urgency. The red warning light is a high-risk signal, and red lights such as oil pressure, water temperature, brake pressure, and charging system are on, indicating that the core components have malfunctioned. It is necessary to find a safe area to pull over and turn off the engine. Do not continue to drive forcefully to avoid irreversible damage such as engine cylinder pulling and brake failure. The yellow or amber indicator light is a warning reminder for engine failure, post-treatment urea, etc The DPF particulate trap, ABS system and other warning lights are on, and the vehicle can still drive at low speed temporarily, but it cannot be overloaded for a long time. It is necessary to plan a route for nearby maintenance. Many overseas cross-border line maintenance stations are rare, and it will be more passive to wait until the vehicle is limited in torque and speed before handling. The green and blue indicator lights are mostly function activation prompts, not faults, so there is no need to be overly nervous. During normal driving, do not only pay attention to the fault lights when they are constantly on. The intermittent alarm signals that appear intermittently should also not be ignored. These intermittent prompts are mostly hidden dangers such as unstable sensor signals, slight blockages in the oil circuit, and poor contact of the line. Continuously running long distances can easily lead to a complete outbreak. Drivers can simply scan various data on the dashboard before leaving the car or during rest and parking, pay attention to changes in oil pressure, water temperature, and air pressure values, and compare them with normal conditions. If any deviation is found, it should be promptly investigated. The fleet can also do well in operator training, familiarize themselves with the meaning of commonly used fault lights, and use simple diagnostic equipment to read fault codes without blindly relying on long-distance hard work. Running cross-border long distances, with complex road conditions and significant differences in fuel quality, vehicles are more prone to various system alarms. Developing the habit of constantly monitoring the dashboard and handling faults in the early stages can not only reduce the trouble of stopping halfway and waiting for rescue, save expensive roadside repair costs, but also ensure timely delivery of goods, stabilize the operation rhythm of the fleet, and make good use of the vehicle's built-in alarm prompts. This is the most cost-effective vehicle maintenance method
